TGE Series Expansion Valves
Thermostatic expansion valves used to meter refrigerant into the evaporator while responding to changing system load and operating conditions.
Refrigeration & HVAC Components for Systems That Need the Right Part, Not Just a Similar Part
Refrigeration and hvac parts. The functioning parts of a refrigeration or air conditioning system that control, protect, measure and circulate refrigerant or other system fluids. Sofia Cooltech Engineers supplies a wide range of these parts for commercial refrigeration, cold rooms, cold storage, industrial cooling, process cooling and HVAC applications.
The range include expansion valves, refrigeration valves, solenoid valves, pressure controls, temperature sensors, liquid level controls, electronic controllers, heat exchangers, compressors and condensing units. These items are applicable to new equipment requirements and component replacement, maintenance, and system restoration procedures.
The main factor for the delivery of components is the technological correspondence. The suitability of a component depends on the refrigerant, the cooling capacity, the pressure, the temperature, the size of the connection, the electrical characteristics and the equipment already installed. So, what we want to do is understand the application first and then choose the product family and specification that suits the system.
Need Help Identifying a Component?
Please email us the model number, part number, nameplate from the equipment or a decent image of the part you have. If the technical review includes the refrigerant and equipment application, it is significantly more useful.
Discuss Your Requirement →Refrigeration & HVAC Component Product Range
The portfolio covers: refrigerant flow management, pressure regulation, temperature monitoring, system protection, electronic control, heat transfer, compression and condensing equipment. Always confirm that the product is suitable for use in accordance with the relevant technical documentation and your system conditions.
Hot Gas Bypass Regulators – TUH Type
Hot gas bypass regulation components for suitable refrigeration arrangements where evaporator or suction-side pressure control is required.
TE 5–TE 55 & T2 Series Expansion Valves
Thermostatic expansion valve options for refrigeration applications where controlled refrigerant metering is required across different operating conditions.
Electronic Expansion Valves
Electronically controlled expansion valves for systems that require responsive refrigerant flow management and closer control of evaporator operation.
Hot Gas Bypass Regulators – KVC / CPCE + LG Type
Pressure-regulating components used in suitable hot gas bypass circuits to help manage refrigeration system operating conditions.
Filter Driers
Filter driers installed in suitable refrigeration circuits to help control moisture and particulate contamination and protect sensitive components.
Ball Valves
Isolation valves used at suitable points in refrigeration and HVAC piping to simplify servicing, maintenance and equipment isolation.
Sight Glasses
Sight glasses provide a visual inspection point in suitable refrigeration circuits for observing refrigerant flow and system condition.
Colibri Electric Expansion Valve
Electric expansion valve equipment for refrigeration applications where electronic control of refrigerant flow is required.
NRV Check Valve
Non-return valve equipment designed to help prevent unwanted reverse flow within suitable refrigeration and fluid circuits.
Brazed & Micro Plate Heat Exchangers
Compact heat-transfer equipment for suitable refrigeration, HVAC and industrial cooling duties where efficient thermal exchange is required.
Ecflex EFET 330 ECfast Cable Strapping
Cable strapping equipment used for organised and secure cable installation and electrical project work.
ERC 213
Electronic refrigeration controller equipment for applications requiring temperature monitoring and coordinated operating control.
Pack Controllers AK PC 530
Pack controller equipment intended for coordinated management of refrigeration compressor groups and related operating functions.
Case / Cold Room Controllers AK CC 550
Controller equipment for suitable cold rooms and refrigeration cases where temperature and operating functions need centralised monitoring.
MCX Programmable Controls
Programmable control equipment for refrigeration and HVAC applications requiring configurable sequences and system-level control.
KP Pressure Switches
Pressure switching devices used to monitor suitable refrigeration operating conditions and support control or protective functions.
KP Thermostat
Thermostatic switching equipment for applications where temperature sensing and controlled switching are required.
KPS 47
Pressure switch equipment for suitable refrigeration and cooling systems where operating pressure needs to be monitored.
Shut-Off Diaphragm Valve
Diaphragm shut-off valve equipment for suitable refrigeration systems where dependable isolation of a section or circuit is required.
Stop Valves – SVA / STC
Stop valve arrangements used to isolate refrigeration equipment and piping sections during operation, inspection or maintenance.
Strainer – FIA
Strainer equipment designed to help remove unwanted particles from suitable refrigeration system flow and protect downstream components.
Check Valves CHV-X & Stop Check Valves SCA-X
Check and stop-check valve solutions for controlling flow direction while providing suitable isolation capability within refrigeration piping.
Double Stop Valves – DSV
Double stop valve equipment for refrigeration systems where multiple isolation points and service flexibility are required.
In-Line Check Valves
Compact check valves installed in suitable piping arrangements to help maintain the intended direction of refrigerant or fluid flow.
Solenoid Valves
Electrically operated valves used to control fluid or refrigerant flow in suitable refrigeration and HVAC circuits.
Pilot Valves
Pilot valve components used within suitable refrigeration control arrangements to assist with controlled operation of larger valve assemblies.
ICS Servo Valve
Servo-operated valve equipment for suitable industrial refrigeration systems requiring controlled refrigerant flow and pressure management.
Quick Closing Drain Valve – QDV
Quick-closing drain valve equipment for suitable refrigeration installations where controlled and rapid draining is part of the system arrangement.
Electronic Switches – LLS 4000
Electronic switching equipment for suitable refrigeration applications requiring liquid-level detection and associated control functions.
Liquid Level Controller – AKS 4100 / EKE 347
Liquid-level control equipment for refrigeration systems where accurate monitoring and regulation of refrigerant level are required.
Motor Valves & Actuators – ICM / ICAD
Motorised valve and actuator combinations for refrigeration installations requiring automated and controlled valve movement.
ICLX Valve & EKE 400 Evaporator Controller
Valve and evaporator control equipment for applications where refrigerant flow and evaporator operation need coordinated management.
Valve Station – ICF
Integrated valve station equipment that brings multiple refrigeration control functions into a coordinated piping arrangement.
ICFD Defrost Module
Defrost control equipment for refrigeration systems where evaporator frost management forms part of normal system operation.
Gas Detector
Gas detection equipment for technical areas where monitoring potentially hazardous gas conditions is part of the plant safety strategy.
Plate Heat Exchanger – SW19-AW59 Range
Plate heat exchanger range for suitable refrigeration, HVAC and industrial cooling systems requiring controlled heat transfer.
Intelligent Air Purger
Air purging equipment for suitable refrigeration systems where non-condensable gases need to be managed to support system operation.
Solenoid Valves – EV220A
Electrically operated solenoid valves for suitable refrigeration, HVAC and general fluid-control applications.
Thermostat Sensor – MBT 3270
Temperature sensing equipment used to monitor operating conditions in suitable refrigeration, HVAC and industrial applications.
Pressure Transmitter – MBS 3000
Pressure transmitter equipment for measuring operating pressure in suitable refrigeration, HVAC and industrial cooling systems.
MBT Temperature Sensor
Temperature sensor equipment for applications where dependable measurement of operating temperature is required.
Solenoid Valve – EV220W
Electrically operated solenoid valve equipment for suitable HVAC, refrigeration and fluid-control duties.
Pressure Transmitter – DST P140
Pressure measurement equipment for suitable refrigeration and industrial applications where accurate system pressure information is needed.
Pressure Transmitters – MBS 1600 / 1650
Pressure transmitter options for monitoring operating conditions in refrigeration, HVAC and industrial cooling equipment.
DST P110 Pressure Sensor
Pressure sensing equipment for suitable refrigeration and industrial applications requiring reliable pressure measurement.
AV210 Angle Seat Valves
Angle seat valve equipment for controlled fluid handling in suitable industrial and process applications.
AVTA Thermostatic Valves
Thermostatic valve equipment used to regulate suitable fluid flow in response to temperature conditions in cooling and industrial applications.
CS Pressure Switches
Pressure switch equipment for suitable air and water applications where pressure monitoring and switching are required.
EV220B 65 2/2 Solenoid Valves
Two-way solenoid valve equipment for suitable industrial, HVAC, refrigeration and fluid-control applications.
VZH Inverter Scroll Compressors
Inverter scroll compressor equipment for applications where variable-capacity operation and controlled compressor output are important.
MT / MTZ & NTZ Reciprocating Compressors
Reciprocating compressor options for suitable commercial refrigeration and cooling applications.
MLZ / MLM / LLZ Scroll Compressors
Scroll compressor range for suitable refrigeration and air-conditioning systems where compact compressor technology is required.
SH / SM / SY / SZ-S Series Scroll Compressors
Scroll compressor options for suitable refrigeration and HVAC duties, selected according to capacity, refrigerant and operating conditions.
DSH Compressors
DSH compressor equipment for suitable commercial refrigeration and cooling applications.
Huawei FHP Compressors
Compact compressor equipment for suitable refrigeration and cooling applications where the equipment specification matches the system requirement.
Turbocor Oil-Free Compressors
Oil-free compressor technology for suitable commercial HVAC and chiller applications where compressor architecture and operating efficiency are key considerations.
Rotary Compressors with Natural Refrigerants
Rotary compressor options for suitable refrigeration applications using natural refrigerants and compatible system designs.
Optyma Condensing Units
Condensing unit equipment for suitable commercial refrigeration, cold rooms and other temperature-controlled applications.
Where Are These Refrigeration Components Used?
The same family of components might have significantly different functions depending on the refrigeration circuit and the equipment. The application thus continues to be an important element of the product selection.
Cold Rooms & Cold Storage
Expansion devices, valves, controls, sensors, compressors and condensing units may be included in cold rooms and temperature regulated storage facilities.
Food Processing & Food Facilities
Refrigeration components are used in food processing, food storage and other industrial cooling systems to create temperature regulated environments.
Commercial Refrigeration
Commercial refrigeration equipment and retail temperature-control applications may employ suitable valves, controls, sensors, compressors, and condensing units.
Industrial Refrigeration
Many industrial systems need integrated pressure, flow, temperature and control operations. The selection of components must be in accordance with the real operating conditions of the plant.
HVAC & Chiller Systems
Selected compressors, valves, sensors, pressure controls and heat-transfer components can be included in appropriate HVAC and chiller setups.
Maintenance & Replacement
Existing refrigeration equipment may require component replacement due to wear, failure, maintenance, system modification or equipment upgrade.
Related HVAC & MEP Engineering Services
Refrigeration components are often part of a wider mechanical, electrical or building-services requirement. Check out Sofia Cooltech Engineers related engineering talents.
HVAC Engineering
Design of commercial and industrial HVAC systems, equipment coordination, installation, testing, commissioning and maintenance support.
Explore HVAC engineering →Ventilation & Exhaust
Car Park Ventilation, Kitchen Exhaust, Staircase Pressurization, Warehouse Ventilation and other Specialist Ventilation requirements.
View ventilation solutions →Cooling Tower Solutions
Industrial cooling support, covering the supply, installation, maintenance and performance optimization of cooling towers.
Explore cooling towers →Electrical & Controls
Electrical and control panel solutions that can be integrated with HVAC, refrigeration and other mechanical systems.
View electrical services →What Information Is Needed to Select a Refrigeration Component?
The selection of a refrigeration component should be based on the system needs and not on looks. The following facts can greatly improve the accuracy of a technical question:
- Existing equipment type and model
- Existing component model or part number
- Refrigerant being used
- Required cooling capacity or system duty
- Evaporating and condensing conditions
- Operating and design pressure
- Required temperature range
- Connection size and piping arrangement
- Electrical supply and control requirements where applicable
- Clear photographs or nameplate information for replacement enquiries
Have the Existing Part Available?
A good photo of the component, nameplate and the surrounding pipes can frequently be valuable. Include equipment model, refrigerant and application, if available.
Send Technical Details →Looking for a Specific Refrigeration or HVAC Component?
Tell us the product name, model number, part number, equipment details, refrigerant type or a good clear picture of the existing component. If the demand is part of a larger HVAC or refrigeration project, mention the application and project location as well.